|
The Solar System B/B is available with a capacity of 160
liters, for tilted roofs. It produces hot sanitary water
on zero cost, using the solar energy.
The continuous research, the use of special materials,
and the most innovative technologies, allow this solar
system to respond on any demand and need.
The compact structure of the panel, made with materials
of highest quality, has a great resistance under the
sun, in maritime areas with big humidity.
The frame of the solar collector is made of aluminum,
the tubes and the surface are of copper thermally
treated with titanium dust, to increase the efficiency,
the emergency glass has a thickness of 4mm, the
isolation is made with expanded polyurethane of high
density in order to avoid the heat dispersions.
The water tank is made of steal, isolated with expanded
polyurethane of high density, supplied with electric
resistance.
This isolation of both the panel and the tank ensures
the functioning even with low external temperatures.
The panel is very simple to install, doesn’t need any
particular maintenances, periodically being enough to
clean the glass, in order to increase the capturing of
sun beams.
The solar system may be installed on roofs, terraces, in
gardens, etc.
You can combine two ore more solar systems in order to
obtain a higher efficiency.
Technical parameters of the water tank
|
Total capacity of sanitary water |
Liters |
150 |
|
Capacity of the closed circuit |
Liters |
10 |
|
Weight when empty |
Kg |
58 |
|
Weight when working |
Kg |
208 |
|
Dimensions |
mm |
Ø 540 x 1255 |
|
Pressure of test sanitary circuit |
atm |
9 |
|
Pressure of exercise sanitary circuit |
atm |
3 |
|
Pressure of test circuit exchanger |
atm |
9 |
|
Pressure of exercise circuit exchanger |
atm |
0.7 |
|
Safety valve |
atm |
6 |
|
Integrating electric resistance |
w |
1500 |
|
Thermostat regulation |
°C |
60 |
|
Maximum exercise temperature |
°C |
90 |
|
Magnesium anode |
mm |
Ø 21 x 400 |
|
Accumulation tank |
|
Steel with low carbon content |
|
Internal protection |
|
Checked |
|
Isolation |
|
Polyurethane without CFC injected to
pressure, with density of 43 Kg for mc |
|
External covering |
|
In stainless steel |
Technical parameters of the solar collector
|
Dimensions |
mm |
1255x2000x80 |
|
Gross surface |
sqm |
2.51 |
|
Net surface |
sqm |
2.25 |
|
Net/gross surface relationship |
|
0.9 |
|
Weight when working |
Kg |
208 |
|
Weight when empty |
Kg |
38 |
All the solar systems can be integrated with our biomass
boilers Kalorina, or with our thermo fireplaces. |
Solar
System B/A
